|author||Aris Adamantiadis <email@example.com>||2010-09-12 22:34:38 +0200|
|committer||Aris Adamantiadis <firstname.lastname@example.org>||2010-09-12 22:34:38 +0200|
Added documentation for threading
Diffstat (limited to 'doc/threading.dox')
1 files changed, 65 insertions, 0 deletions
diff --git a/doc/threading.dox b/doc/threading.dox
new file mode 100644
@@ -0,0 +1,65 @@
+@page threads Chapter 8: Threads with libssh
+@section threads_with_libssh How to use libssh with threads
+libssh may be used in multithreaded applications, but under several conditions :
+ - Threading must be initialized during the initialization of libssh. This
+ initialization must be done outside of any threading context.
+ - If pthreads is being used by your application (or your framework's backend),
+ you must link with libssh_threads_pthread dynamic library and initialize
+ threading with the ssh_threads_pthreads threading object.
+ - If an other threading library is being used by your application, you must
+ implement all the methods of the ssh_threads_callbacks_struct structure
+ and initialize libssh with it.
+ - At all times, you may use different sessions inside threads, make parallel
+ connections, read/write on different sessions and so on. You can use a
+ single session in several channels at the same time. This will lead to
+ internal state corruption. This limitation is being worked out and will
+ maybe disappear later.
+@subsection threads_init Initialization of threads
+To initialize threading, you must first select the threading model you want to
+use, using ssh_threads_set_callbacks(), then call ssh_init().
+ssh_threads_noop is the threading structure that does nothing. It's the
+threading callbacks being used by default when you're not using threading.
+@subsection threads_pthread Using libpthread with libssh
+If your application is using libpthread, you may simply use the libpthread
+However, you must be sure to link with the library ssh_threads_pthread. If
+you're using gcc, you must use the commandline
+gcc -o output input.c -lssh -lssh_threads_pthread
+@subsection threads_other Using another threading library
+You must find your way in the ssh_threads_callbacks_struct structure. You must
+implement the following methods :
+Good luck !